|
5/16/2013 Tycon Power Systems Introduces New High Power 48VDC UPSPro Outdoor Backup Power SolutionRead NowUtah company provides unique solutions for Backup PowerMay 16, 2013 – Bluffdale, Utah – Tycon Power® Systems is proud to announce the release of its new 48VDC battery backup system with 192W load capacity. The UPSPro™ series outdoor backup systems are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered using 110-240VAC grid power. If grid power fails, the controller seamlessly switches over to battery power and when grid power comes back on, the controller auto recovers. There is no interruption in voltage supplied to the load. “This 48VDC unit is our latest addition to our UPSPro™ family. It joins our 12VDC and 24VDC models” said Scott Parsons, CEO. “Because the load output is isolated, the system can supply -48VDC or +48VDC. Coupled with our 802.3af and 802.3at POE switches, the 48VDC UPSPro system will find many applications in surveillance, VOIP and wireless applications where the operator needs 24/7 100% uptime operation.” The outdoor rated, weatherproof enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. Equipment runs on battery power which isolates it from power line surges which is a main cause of outdoor equipment failure. The TP-UPS48-50 provides up to 192W of protected power to a load. They are normally in stock in Salt Lake City, Utah or at one of Tycon Power® Systems worldwide distributors. *MSRP is $1339.95 aboutHeadquartered in Bluffdale, Utah, Tycon Power® Systems manufactures remote power systems for wireless and video applications and specializes in Power over Ethernet power solutions. It has offices and warehouse facilities in the USA as well as distributors and representatives worldwide. Product Specific URL: http://tyconsystems.com/index.php/products/tycon-power/upspro contactSeth Allen / Sales and Marketing Manager
[email protected] 14641 S 800 W Suite A Bluffdale, UT 84065 801-432-0003 FAX 801-618-4220 www.tyconsystems.com
0 Comments
5/9/2013 Tycon Power Systems Introduces New Hardened 24 Port 802.3af/at POE Gigabit Managed SwitchRead NowUtah company provides unique solutions for Power Over EthernetMay 9, 2013 – Bluffdale, Utah – Tycon Power® Systems is excited to announce the release of its new TP-SW24MG2-POE+ hardened 24 Port fully manageable PoE switch. Ports can be configured as IEEE 802.3af PoE compatible or IEEE802.3at PoE compatible (Max 12 ports as 802.3at). The switch has two Gigabit uplink ports using CAT5/6 cable or fiber optic if using an SFP Fiber Transceiver. The switch has a built in web server that allows management via a web browser. It can also be managed thru Telnet using the built in command line interface. “The TP-SW24M-G2-POE+ brings a new level of functionality and manageability in a hardened POE Switch at a very reasonable price” said Scott Parsons, CEO. “With its two year warranty an installer can be confident in his infrastructure investment." The switch supports SNMP and has a serial port console connection for those who want to manage the switch via a terminal. The switch comes with a DB9 to RJ45 adapter cable for accessing the switch serial port. The POE switch can run on AC Power (100-240VAC 50/60Hz) or DC Power (-48VDC) for maximum flexibility. With its wide operating temperature (-40C to +75C), the switch is designed to operate outdoors inside a weatherproof enclosure. It is also rack mountable with its included 19” rack mount brackets Some functional features included in this switch are: VLAN Configuration, Port PoE Control, Port Bandwidth Control, Port Trunking, Port Mirroring, Broadcast Storm Control, Access Control (ACL), MAC Binding and Filtering, Radius Support (AAA), Multiple Spanning Tree Protocol (MSTP), IGMP Snooping, Ethernet Automatic Protection Switching (EAPS). *MSRP is $1299.95 aboutHeadquartered in Bluffdale, Utah, Tycon Power® Systems manufactures remote power systems for wireless and video applications and specializes in Power over Ethernet power solutions. It has offices and warehouse facilities in the USA as well as distributors and representatives worldwide. Product Specific URL: http://tyconsystems.com/index.php/products/power-over-ethernet/poe-injectors-2 contactSeth Allen / Sales and Marketing Manager
[email protected] 14641 S 800 W Suite A Bluffdale, UT 84065 801-432-0003 FAX 801-618-4220 www.tyconsystems.com 3/29/2013 Tycon Power Systems Introduces New Dual Input/Dual Output Battery Charge Controller for Wireless Security ApplicationsRead NowUtah company provides unique solutions for Remote PowerMarch 29, 2013 – Bluffdale, Utah – Tycon Power® Systems is excited to announce the release of its new Dual Input/Dual Output battery charge controller. with 24VDC wire terminal and 48V POE outputs for backup power and remote power applications. The low cost SCPOE series can charge lead acid batteries from solar panel input and/or Power Over Ethernet (POE) input. The 8A solar panel input takes priority so when the sun is shining, grid power is not used. There are two outputs; The 30W Power Over Ethernet (POE) output utilizes a high efficiency DCDC converter to provide 48VDC POE and the secondary wire terminal output on the back is regulated at 24VDC. “The TP-SCPOE-2448 was developed specifically to power a camera and a wireless radio from a 24VDC battery system” said Scott Parsons, CEO. “It is the essential building block for outdoor wireless surveillance applications." The SCPOE series offers full protections for over-charge, over-discharge, short circuit, over-voltage and overcurrent. Low self consumption of <0.5W make them ideal for remote power applications. The units are rated for operation from -30°C to 60°C, suitable for year round outdoor operation in a weatherproof enclosure. OEM and custom configurations are available upon request. *MSRP is $89.95 aboutHeadquartered in Bluffdale, Utah, Tycon Power® Systems manufactures remote power systems for wireless and video applications and specializes in Power over Ethernet power solutions. It has offices and warehouse facilities in the USA as well as distributors and representatives worldwide. Product Specific URL: http://tyconsystems.com/index.php/products/tycon-power contactSeth Allen / Sales and Marketing Manager
[email protected] 14641 S 800 W Suite A Bluffdale, UT 84065 801-432-0003 FAX 801-618-4220 www.tyconsystems.com Utah company provides unique solutions for Remote PowerMarch 21, 2013 – Bluffdale, Utah – Tycon Power Systems Announces The Release Of Its New Very High Power TP-VRHP-2456-5 24VDC To 56VDC 250W Voltage Converter “The new industrial grade TP-VRHP-2456-5 provides isolated and regulated 56VDC @ 4.5A from a 24VDC (18V-36V) power source” said Scott Parsons, CEO. “The 24VDC input makes this high power converter perfectly suited for operating from a battery or vehicle system. The 56VDC isolated output is compatible with IEEE802.3af and IEEE802.3at POE specifications." The TP-VRHP-2456-5 has wire terminal inputs and outputs. It converts 18VDC to 36VDC into 56VDC regulated 250W output. It has various protections for over/under voltage, short circuit, reverse voltage and over-temperature. There are two indicators for input and output power. A fan provides active cooling. The unit is DIN rail mountable for universal industrial application and operates over a wide -30C to +65C operating temperature range. TP-VRHP-2456-5 carries a 2 year warranty. They are normally in stock in Salt Lake City, Utah or at one of Tycon Power Systems worldwide distributors. *MSRP is $189.95 aboutHeadquartered in Bluffdale, Utah, Tycon Power Systems manufactures remote power systems for wireless and video applications and specializes in Power over Ethernet power solutions. It has offices and warehouse facilities in the USA as well as distributors and representatives worldwide. Product Specific URL: http://www.tyconsystems.com/index.php/voltage-converters-non-poe contactSeth Allen / Sales and Marketing Manager
[email protected] 14641 S 800 W Suite A Bluffdale, UT 84065 801-432-0003 FAX 801-618-4220 www.tyconsystems.com Utah company provides unique solutions for Remote PowerFebruary 9, 2013 – Bluffdale, Utah – Tycon Power Systems Announces The Release Of Its New 50W 12VDC Off-Grid RemotePro™ Remote Power System “The new RPST12-200-240 provides 50W continuous power with 5-6hrs of sun per day. It has a controller with 15A load output for intermittent high current applications like electronic gates, video surveillance or lighting applications.” said Scott Parsons, CEO. The systems come complete with all hardware and wiring required for a pole or wall mount installation. The gasketed weatherproof enclosure is power coated plated steel and includes security closures. Systems are also available without batteries to help reduce international shipping costs. RemotePro™ systems carry a 2 year warranty. They are normally in stock in Salt Lake City, Utah or at one of Tycon Power Systems worldwide distributors. *MSRP is $2499.95 aboutHeadquartered in Bluffdale, Utah, Tycon Power Systems manufactures remote power systems for wireless and video applications and specializes in Power over Ethernet power solutions. It has offices and warehouse facilities in the USA as well as distributors and representatives worldwide. Product Specific URL: http://tyconsystems.com/index.php/products/tycon-power/remotepro contactSeth Allen / Sales and Marketing Manager
[email protected] 14641 S 800 W Suite A Bluffdale, UT 84065 801-432-0003 FAX 801-618-4220 www.tyconsystems.com Utah company provides unique solutions for Remote PowerFebruary 8, 2013 – Bluffdale, Utah –Tycon Power Systems Announces The Release Of Its New High power 10/100/1000m Gigabit Passive POE Inserter. “We have seen more and more higher power devices entering the market that operate beyond the scope of present POE power standards. They need to use all 4 pairs (8 wires) for POE power and Gigabit data. Typical power requirements are 50W to 75W.” said Scott Parsons, CEO. “The POE-INJ-1000-DIN allows for powering of these Hi Power devices from an existing voltage source such as a battery system or an AC to DC power supply. The locking Mini DIN power connector creates a secure power connection to the inserter." The POE-INJ-1000-DIN is a shielded passive power over Ethernet inserter that is compatible with data speeds up to 1 gigabit. The DIN connector is a 4pin locking Mini DIN connector. The RJ45 connectors are shielded to ensure continuous shielding from power source to destination device. There is an LED to indicate power on. Gigabit Passive POE Injectors carry a 2 year warranty. They are normally in stock in Salt Lake City, Utah or at one of Tycon Power Systems worldwide distributors. *MSRP is $7.95 aboutHeadquartered in Bluffdale, Utah, Tycon Power Systems manufactures remote power systems for wireless and video applications and specializes in Power over Ethernet power solutions. It has offices and warehouse facilities in the USA as well as distributors and representatives worldwide. Product Specific URL: http://tyconsystems.com/index.php/products/power-over-ethernet contactSeth Allen / Sales and Marketing Manager
[email protected] 14641 S 800 W Suite A Bluffdale, UT 84065 801-432-0003 FAX 801-618-4220 www.tyconsystems.com Utah company provides unique solutions for Remote PowerFebruary 8, 2013 – Bluffdale, Utah – Tycon Power Systems Announces The Release Of Its New 70W High Power 24VDC To 24VDC Voltage Converter/Regulator. “The TP-VRHP-2424 is a high powered DC to DC voltage converter/regulator in a metal case that provides 70W of 24VDC regulated and protected voltage from a 24VDC battery system” said Scott Parsons, CEO. “24VDC solar and battery systems can have wide voltage fluctuations due to battery charging voltages and battery discharge voltages. With its wide input voltage range of 18VDC to 36VDC, 70W output and industrial temperature range operation it has numerous applications in remote and backup power systems. The input and output are isolated so it can use a positive or negative DC voltage at the input and the isolation provides added protection from voltage surges." The TP-VRHP-2424 features short circuit, overvoltage and overload protections. The voltage output is regulated to ensure stable voltage for sensitive equipment. They have wire terminal inputs and outputs for maximum flexibility. The units come with DIN rail adapters for efficient DIN rail mounting. TP-VRHP DC to DC Converters carry a 2 year warranty. They are normally in stock in Salt Lake City, Utah or at one of Tycon Power Systems worldwide distributors. *MSRP is $59.95 aboutHeadquartered in Bluffdale, Utah, Tycon Power Systems manufactures remote power systems for wireless and video applications and specializes in Power over Ethernet power solutions. It has offices and warehouse facilities in the USA as well as distributors and representatives worldwide. Product Specific URL: http://www.tyconsystems.com/index.php/voltage-converters-non-poe contactSeth Allen / Sales and Marketing Manager
[email protected] 14641 S 800 W Suite A Bluffdale, UT 84065 801-432-0003 FAX 801-618-4220 www.tyconsystems.com Utah company provides unique solutions for Remote PowerFebruary 7, 2013 – Bluffdale, Utah – Tycon Power Systems announces the release of its very high power DC to DC converter with passive POE inserter that supplies 70W total power to a POE device. “Tycon Power Systems TP-DCDC-2456G-VHP supplies 70W of POE power on all 8 Ethernet wires from a 24VDC battery system making this device the perfect solution for remote and backup power for Ubiquiti airFiber™ antennas and also various outdoor PTZ camera applications.” said Scott Parsons, CEO. “With the wide 18VDC to 36VDC input range and industrial temperature operation, the new DC to DC converter will find many applications in remote powered systems and backup power systems." The TP-DCDC-2456G-VHP works with UBNT airFiber™ antennas and any PTZ camera that accepts power on all 8 Ethernet wires. They are Passive POE. They have two inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for surge, short circuit and overload. The input and output are isolated. Operating temperature is -30 to +60C. They are normally in stock in Salt Lake City, Utah or at one of Tycon Power Systems worldwide distributors. *MSRP is $110.95 aboutHeadquartered in Bluffdale, Utah, Tycon Power Systems manufactures remote power systems for wireless and video applications and specializes in Power over Ethernet power solutions. It has offices and warehouse facilities in the USA as well as distributors and representatives worldwide. Product Specific URL: http://tyconsystems.com/index.php/products/power-over-ethernet/poe-injectors contactSeth Allen / Sales and Marketing Manager
[email protected] 14641 S 800 W Suite A Bluffdale, UT 84065 801-432-0003 FAX 801-618-4220 www.tyconsystems.com Utah company provides unique solutions for Remote PowerFebruary 6, 2013 – Bluffdale, Utah – Tycon Power Systems Announces The Release Of Its New 70W High Power 24VDC To 56VDC Voltage Converter. “The TP-VRHP-2456 is a high powered DC to DC voltage converter in a metal case that provides 70W of 802.3af and 802.3at voltage (56VDC) from a 24VDC battery system” said Scott Parsons, CEO. “With its wide input voltage range of 18VDC to 36VDC, 70W output and industrial temperature range operation it has numerous applications in remote and backup power systems. The input and output are isolated so it can use a positive or negative DC voltage at the input and the isolation provides added protection from voltage surges." The TP-VRHP-2456 features short circuit, overvoltage and overload protections. The voltage output is regulated to ensure stable voltage for sensitive equipment. They have wire terminal inputs and outputs for maximum flexibility. The units come with DIN rail adapters for efficient DIN rail mounting. TP-VRHP DC to DC Converters carry a 2 year warranty. They are normally in stock in Salt Lake City, Utah or at one of Tycon Power Systems worldwide distributors. *MSRP is $92.95 aboutHeadquartered in Bluffdale, Utah, Tycon Power Systems manufactures remote power systems for wireless and video applications and specializes in Power over Ethernet power solutions. It has offices and warehouse facilities in the USA as well as distributors and representatives worldwide. Product Specific URL: http://tyconsystems.com/index.php/voltage-converters-non-poe contactSeth Allen / Sales and Marketing Manager
[email protected] 14641 S 800 W Suite A Bluffdale, UT 84065 801-432-0003 FAX 801-618-4220 www.tyconsystems.com Utah company provides unique solutions for Remote PowerDecember 12, 2012 – Bluffdale, Utah – Tycon Power Systems Announces The Release Of Its New 300W Smart Battery Charger For 48VDC Battery Systems. “The TP-BC48-300 follows in the footsteps of our successful 12VDC and 24VDC models. It is powered by 110V- 240VAC and provides a regulated load output with load control and plenty of power to charge larger battery banks.” said Scott Parsons, CEO. “The TP-BC battery chargers are designed to operate over the wide temperature ranges that are seen in typical outdoor enclosures installed throughout the world." The TP-BC48-300 features over discharge protection, a regulated 48V load output, ability to charge WET or GEL/AGM batteries, and seamless power transition and recovery in the event of a power failure. It is an important building block used for indoor and outdoor battery backup systems. It can provide up to 6A load output and up to 6A battery charging current. It is compatible with solar and wind power charging systems. TP-BC Smart Battery Chargers carry a 1 year warranty. They are normally in stock in Salt Lake City, Utah or at one of Tycon Power Systems worldwide distributors. *MSRP is $285.95 aboutHeadquartered in Bluffdale, Utah, Tycon Power Systems manufactures remote power systems for wireless and video applications and specializes in Power over Ethernet power solutions. It has offices and warehouse facilities in the USA as well as distributors and representatives worldwide. Product Specific URL: http://www.tyconsystems.com/index.php/battery-chargers contactSeth Allen / Sales and Marketing Manager
[email protected] 14641 S 800 W Suite A Bluffdale, UT 84065 801-432-0003 FAX 801-618-4220 www.tyconsystems.com |
Details
Categories
All
Sort by Month
August 2018
AuthorSara, Tycon Systems Marketing Department. |