|
The TPBAT12-52 high rate valve regulated sealed lead acid (VRLA) AGM battery has been developed for long term operation in harsh environments. They have a high cycle life and impressive 8 year float life. They are designed to operate over a wide temperature range such as those experienced in outdoor equipment applications. The batteries can be installed in any position without affecting their performance or reliability. The batteries have a carrying/lifting handle for convenience. Click here for more information.
0 Comments
The EZ-Go®-5+ is a high power outdoor 250mW wireless Access Point or Client Bridge / Router system operating in the 5GHz unlicensed frequency spectrum providing real world thruput up to 100 Mb/sec. It complies with the 802.11an standards to insure interoperability. The EZ-Go®-5+ is housed in a UV resistant and UL rated weatherproof enclosure with a nice aesthetic appearance and clean lines. It includes an integrated 16dBi high efficiency MIMO antenna for extended range. With its advanced software, the EZ-Go®-5+ supports multiple operating modes, including; Access Point, Access Point (WDS), Client, Client (WDS), WAN Gateway, WLAN Gateway, Repeater. The EZ-Go®-5+ comes complete with a Cat5e rated POE (Power Over Ethernet) power inserter. The corrosion resistant bracket system accommodates pole or wall mounting. Features
- Very Compact Size - Dual Output: 48V PoE plus 24VDC Output - Converts an Active PoE Input to a DC output - Output Power Up To 15W - Short Circuit, Over Current Protection The POE-MSPLT-4824P-F is a unique splitter with dual outputs. It accepts 802.3af or 802.3at PoE and provides 48V PoE and 24VDC outputs concurrently so two separate devices can be powered. The 24VDC output is provided on a standard 5.5mm/2.5mm barrel connector and the Data/PoE output is provided on standard female RJ45 network connector, each on a dedicated 6” cable. The DC connector is compatible with Tycon passive PoE injectors like POE-INJ-1000-S for ease of integration. In addition to being compatible with 10/100MB Ethernet speeds, inputs and outputs are isolated and the devices include protections for short circuit and overload. Gigabit PoE Inserter +/- 10-60VDC IN, 56VDC OUT Dual channel 802.3at PoE, 70W Features
- Input Voltage +/- 10-60VDC; Output 56VDC Dual Channel 802.3at, 70W - Integrated Gigabit PoE+ Inserter - Short Circuit, Over Current and Over Voltage Protection - High Temperature Operation 60°C - Removable Wire Terminal Input for up to 12AWG wires The Gigabit compatible TP-DCDC-1256G-VHP and TP-DCDC1256GD-VHP are special very high power DC to DC converters / POE inserters designed especially for higher power PoE applications. The TP-DCDC-1256GD-VHP has dual channel 802.3at output for PTZ Cameras like the Axis 6000 series. The TP-DCDC-1256G-VHP is designed for those High Power Passive PoE devices like Ubiquiti airFiber. The unique POE inserter supplies 56VDC POE power on all 8 Ethernet wires (4 Pair) with a total output of up to 70W. The wide input voltage range (10VDC to 60VDC) makes these units universal in battery powered applications. The units input and output is isolated so they work in a negative ground of positive ground system. They have two DC inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for surge, short circuit and overload. The units come complete with a DIN Rail mounting kit for mounting to a standard DIN rail. Send in your case studies and receive a solar power bank. We love learning about all the different applications our products are used for. Remote Power Systems, Remote Power Monitors, Switches, or any other products. No matter the product and application, we'd love to hear from you! Solar Power Bank: Use this compact device to power your phone or tablet while camping, hiking, sun bathing, and more... The TPB-5-Solar can be charged via USB or the small solar panel on the front. Tycon Power Systems’ RPPL1212-36-30 is used to power 2 13W LED lights and a 12V photocell which allows the lights to operate. Our RPPL1212-36-30 is an 8W Continuous Power system with 6 hrs peak sun. 12V 36Ah Battery, 12VDC 15W (unregulated) wire terminal and 12V 18W (unregulated) PoE output. Polycarbonate Enclosure.
Hold down the reset button while powering up the TPDIN-Monitor-WEB and hold for 15seconds. Release reset button.
The unit should be back to factory defaults. Note: Resetting to factory defaults doesn't affect the IP address settings. If you have more questions about our products; check out our Knowledge Base. Hello! Combine our RemotePro™ Solar System and our BreezePro™ (wind turbine). The BreezePro™ plugs directly into the batteries as a supplemental power source for the RemotePro™ systems. If you would like to know more about these products, click here.
Features
To learn more about these products: click here Find all of the latest EZ-Bridge® firmware downloads on our website!
Latest Firmware DownloadsEZ-Bridge® LT2+ (EZBR-0214+) and EZGo2+ (EZGO-0214+) . GEN 3
More available on the website... |
Details
Categories
All
Sort by Month
August 2018
AuthorSara, Tycon Systems Marketing Department. |