5 port High Power Gigabit 802.3at PoE switch. 12-36VDC Input. 56V 802.3at PoE Out, 140W Total, IEEE 802.3af/at.
The TP-SW5G-24HP Power Over Ethernet (PoE) 10/100/1000Mb switch offered by Tycon Power Systems is a fully automatic high speed 5 port Ethernet switch with up to 35 Watts of PoE power per port. It complies with the IEEE802.3af/at specifications for valid PoE device detection. It accepts 12-36VDC power on the wire terminal input and supplies power on 4 ports with 802.3at PoE output. Maximum output power for all ports is 140W with 24V input and 70W with 12V input.
NEW PoE Mini Splitter! POE-MSPLT-4848P-F
The POE-MSPLT-48xxP-F is a unique splitter with dual outputs. It accepts 802.3af or 802.3at PoE and provides 48V PoE and 48V or 24V or 12VDC outputs concurrently so two separate devices can be powered. The DC output is provided on a standard 5.5mm/2.1- 2.5mm barrel connector and the Data/PoE output is provided on standard RJ45 network connector, each on a 6” cable. The DC connector is compatible with Tycon passive PoE injectors like POE-INJ-1000-S for ease of integration. In addition to being compatible with 10/100MB Ethernet speeds, inputs and outputs are isolated and the devices include protections for short circuit and overload.
The TPDIN-SC48-20 is a MPPT Solar Charge Controller with Integrated Remote Power Monitoring TPDIN™ technology and 7 Port Passive Gigabit PoE Switch.
This switch can be used with our RemotePro™ Solar Systems as well as our UPSPro™ Battery Backup Systems. The web interface has full capabilities to measure and log battery voltage, battery current, input current, load current and battery temperature. Ports can be controlled by a settable ping watchdog to power cycle the port if communications to the unit are interrupted. Auxiliary port can be controlled by voltage or temperature or time so it can be programmed to control lights, pumps, generators, heaters, fans, etc. The unit supports automated Email alerts if user programmed limits are exceeded so that the user can be alerted in case of developing problems at the site.
Test out our EZ-Bridge® products before you buy them here.
Live demo of the user interface, click Live Demo above. User name is "user" ; Note: password is not required.
The EZ-Bridge®-LT2+ is a high power outdoor 250mW wireless bridge system operating in the 2.4GHz unlicensed frequency spectrum providing real world thruput up to 100Mb/sec.
It complies with the 802.11bgn standards to insure interoperability.
The EZ-Bridge®-LT2+ creates a transparent wireless bridge between two networks up to 3 miles apart with good line of sight.
It supports multiple MAC addresses and DHCP across the wireless link.
First calculate the total watts required for your equipment. Let’s assume 50W.
Let’s assume your equipment will run 24hrs per day.
50W x 24hrs = 1200Wh ; so each day you are consuming 1200W
Figure out your worst case winter sun in your area; let’s assume it’s 3hrs peak sun per day.
So with 3hrs of sun you need to generate 1200W of power
1200W per day equipment load / 3hrs sun per day = 400W of solar panels
*** This is the absolute minimum amount of solar you would require. With solar it’s always a good rule of thumb to add at least 20% additional capacity, so the recommended would be 500W minimum of solar panel capacity to support 50W equipment load with 3hrs of sun per day.
The RPSTL RemotePro™ series outdoor power systems are designed for applications that require a primary off-grid power source to run various equipment. The vented weatherproof enclosures have generous space available inside for mounting customer equipment. A 19” 1U rackmount feature is integral to the enclosure as are multiple DIN Rail mounts.
All enclosures are hinged and gasket sealed with locking latches for security. The latches can be locked using a standard customer supplied padlock.
The enclosures can be mounted to a wall or pole with the included mounting bracket system. Poles up to 11” diameter can be accommodated.
The high quality solar panels have a 25year power output guarantee. The 320W panel can be mounted to a pole or wall with the included side-of-pole mounting system.
The 12V and 24V battery systems come with a 20A PWM solar controller. Enclosures have three cable gland ports for CAT5 cable, antenna cables/connectors or other cabling. The enclosures include a thermostatically controlled fan which turns on automatically when the temperature exceeds 45°C.
Batteries are a Non-Spillable Valve Regulated Sealed Lead Acid Advance Glass Matt (AGM) type which have excellent temperature and deep discharge performance. Expected battery life exceeds 5years.
The systems come with all cabling required to connect the batteries to the controller and 20’ outdoor rated cable to connect the solar panels to the controller.
Independence Day was in 1776; that's 241 years ago. Can you believe that?
This year, to celebrate the fourth of July we are offering FREE ground shipping on orders over $995. Since we are closed the 3rd and 4th, you can redeem your free shipping on the 5th and 6th of July! Make sure to use the code above :-)
If you have any questions, please leave a comment below.
Happy Birthday USA!
Since tomorrow is the 4th of July (USA's Independence Day), we are closed today and tomorrow for a long holiday weekend!
If you place orders today or tomorrow please take into account that your order will not be processed until the following business day, and check out our blog again tomorrow for an awesome deal! :-)
In the meantime, here are a couple pictures of our warehouse manager Tracey, kindly, asking me not to take pictures of him while hauling this HUGE aluminum enclosure around. (I asked him if I could put these pictures on our blog before I posted them, he laughed as he saw them and agreed, so enjoy)